Category Archives: IAM

SMT Pullmax – Hydraulic Angle Bending Roll | 3" x 3" x 3/8"

SMT Pullmax – Hydraulic Angle Bending Roll | 3" x 3" x 3/8"

Used

Stock: 8009P
Model: Z31 | Serial Number: 61040-17
Location: 590 Bank St, Painesville, OH 44077

Equipped With:
– Remote Hand Pendant Control
– Horizontal/Vertical Operation
– Lateral Roller Side Supports
– Extra Roller Dies
– Horsepower: 9
Specs:
Angle Leg Out: 3" x 3" x 3/8"

2006 North American – Single Girder Under Hung Bridge Crane | 3 Ton x 60'

2006 North American – Single Girder Under Hung Bridge Crane | 3 Ton x 60'

Used

Stock: 8008
Model: N/A | Serial Number: N/A
Location: 750 S. Reservoir, Pomona, CA

Equipped With:
– End Truck Drive
– Pendant Control
– Crane already pulled down and ready to ship, no charge to load onto flat bed truck
– Number 10 On Bridge
– Note: Specifications Subject To Change
Specs:
Capacity: 3 Ton

2006 North American – Single Girder Under Hung Bridge Crane | 5 Ton x 40'

2006 North American – Single Girder Under Hung Bridge Crane | 5 Ton x 40'

Used

Stock: 8007
Model: | Serial Number: SH4012-204-1L2
Location: 750 S. Reservoir, Pomona, CA

Equipped With:
– End Truck Drive
– Pendant Control
– Crane already pulled down and ready to ship, no charge to load onto flat bed truck
– Center of wheel to center of wheel across the span of the crane is 41’ – 0”
– Height of crane from bottom of riding surface of wheels to highest point of crane is 31”.
– #8 On Bridge
– Note: Specifications Subject To Change
Specs:
Capacity: 5 Ton

Frontier – Double Girder Top Running Bridge Crane | 10 Ton x 40'

Frontier – Double Girder Top Running Bridge Crane | 10 Ton x 40'

Used

Stock: 8006
Model: N/A | Serial Number: 3951
Location: 750 S. Reservoir, Pomona, CA

Equipped With:
– End Truck Drive
– Pendant Control
– Crane already pulled down and ready to ship, no charge to load onto flat bed truck
– #7 On Bridge
– Note: Specifications Subject To Change
Specs:
Capacity: 10 Ton

Enco – Second Operation Lathe | 10" x 20"

Enco – Second Operation Lathe | 10" x 20"

New

Stock: 8020
Model: 112-8100 | Serial Number: 2592380
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– Bed Turret
– Production Slide
– Tool Holders With Riser Blocks
– Lever 5C Collet Closer
– Mechanical Bar Feed
– Coolant System
– Tooling
– Horsepower: 1/2
Specs:
Swing Over Bed: 10"

Detroit – Hoist & Trolley | 10 Ton

Detroit – Hoist & Trolley | 10 Ton

Used

Stock: 8005JVPomona
Model: D30T23-15M80 | Serial Number: 158941
Location: 750 S. Reservoir, Pomona, CA

Equipped With:
– Pendant Control
– Hoist already pulled down and ready to ship, no charge to load onto flat bed truck
– Note: Specifications Subject To Change
Specs:
Capacity: 10 Ton