Archives

Plastics Blown Film Facility

Public Auction Plastics Blown Film Facility
 
 
  
 
PRT- FBM mod. 130MM Reclaim Line
 
 
 
 
  
 
PRT- FBM mod. 85MM Reclaim Line
 
 
 
 
  
 
SSI SR-375E, 150hp, Uni-Shear Shredder
 
 
 
 
  
 
American Ambaco mod. 10647 Auto Baler
 
 
 
 
  
 
Davis Standard Zipper Line Extruder
 
 
 
 
  
 
Amplas mod. M1625-SU Bag Machine
 
 
 
 
  
 
Alpine TBF20-40 3-Layer Die
 
 
 
 
  
 
W&H 12” Mono Die
 
 
 
 
  
 
Advance mod. 2052 Floor Scrubber
 
 
 
 
  
 
Sherman PBO/1600-100 BSEGX 63” Treater
 
 
 
 
  
 
AR Engineering 64” Winder
 
 
 
 
  
 
Battenfeld Gloucester Servo Wicketer
 
 
 
 
  
 
Lung Meng TA-1000 Polydraw Bag Machine
 
 
 
 
 
       
RECLAIM LINES
 (1991) PRT- FBM mod. 130MM Reclaim Line 130mm Air Cooled Vented Barrel
 Extruder, 30:1 L-D, Koellmann Gearbox, 316 HP or 236KW, Bull Electric
 Motor w/ DC Controller, (2006) PRT Fluff Surge Hopper w/ Crammer Feeder
 and Cyclone, Touch Screen Controller, Hydraulic Screen Changer w/ Power Pak,
 Watering Style Pelletizer w/ Peco Water System, Spin Dryer w/ Surge Bin on
 Stand, 12-Zone Temperature Control Panel, Digital Controllers, Water Cooled
 Feed Throat, 80,220 hours. 
(1995) PRT- FBM mod. 85MM Reclaim Line 85mm Air Cooled Vented Barrel
Extruder, 30:1 L-D, Koellmann Gearbox, 100HP at 1.7 SF, 100 HP Bull Electric 
motor w/ DC controller, (2006) PRT Fluff Surge Hopper w/ Crammer
Feeder and Cyclone, Touch Screen Controller, Hydraulic Screen Changer
w/ Power Pak, Watering Style Pelletizerw/ Peco Water System, Spin Dryer
w/ Surge Bin on Stand, 12-Zone Temperature Control Panel, Digital
controllers, Water Cooled Feed Throat, 79,354 hours.
(2006) PRT Fluff Surge Hopper
SHREDDER
 (2006) SSI mod. SR-375E, 150hp, Uni-Shear Shredder, Single Shaft,
 49”x77” Cutting Chamber w/ 25hp Hyd. Ram. S/N UO184
BAG MACHINES & WINDERS
 (2006) Lung Meng mod. TA-1000 Fully Automatic Polydraw on Roll Bag
 Making Line w/ Servo-Control System for Drawtape Bags, Including
 Lifting Unwind (TAI-1000C) High Speed Polydraw Bag on Roll Making
 Machine (TA-1000DT), Co-Speed High Performance Perforating and Sealing
 Machine (TA-1000C), Triangle Folding Equipment (TAF-1200A), Interleave
 Winder (TAD-250IV). S/N PC06062901.
 (1998) Battenfeld Gloucester mod. RH300BPN Century 2000 Auto Wicketer, 3
 0" Servo Sideweld Bag Machine, 14" Arm Auto Wicketer, Conveyor, w/ High
 Speed Wicket Punch Units, E/E, Conveyor, PLC Controls w/ Touch Screen,
 Static Elimination, (1998) Battenfeld Two-Position Model Unwind w/ Folder,
 w/ 3" Air Shafts Unwind, Master PI# D40059561. S/N 39380-02.
 (2001) AR Engineering mod. W-64 64" Back to Back Surface Winder, w/ Trim
 Removal System, 3" Air Shafts, Fife Edge Guide System, w/ CDP-01
 Controller, Shaft Loading Hoist for each side. S/N 2653-01-01.
 (1990) Reynolds 60-80” Turret Winder.
 (1999) Amplas mod. M1625-SU, 4-Shuttle Bag Machine. S/N 55-9506-1
EXTRUSION
 (1999) Davis Standard mod. P2267 Zipper Line Extruder
 w/ Zipper Dual Profile Head, 460V 3PH, 65 FL Amps.
 S/N 51344A.
 Sterling 2.5” Extruder Gearbox SR# 29915345, UINEX 4.0, Rating 75,
 Input RPM 1750, Ratio 14.20, 25 Qts Oil, Service Factor 1.6.
MISC. EQUIPMENT
 American Ambaco mod. 10647, 36”x26” High Density Auto Tie Horiz. B
 aler, 30hp Hyds, AB Programmer
 Alpine mod. TBF20-40, 225mm, 3-Layer Die w/ HK500 Air Ring & Cart
 W&H 12” Mono Die w/ Air Ring
 (1980) Wolverine Printer, 32” Repeat, 30” Wide
 GEC 10” 3-Layer Die
 Sano 12” 5-Layer Die
 (1999) MEC mod. 2548HT Scissor Lift
 (1998) Marathon mod. RJ-45.0 Hyd. Compactor
 (2007) Crown mod. 30WRTT-S, Walk Behind Extending Forklift,
 2400 lb cap. S/N 1A147591
 (2007) Advance mod. 2052 Floor Scrubber. S/N 1584989
 (2000) Sherman mod. PBO/1600-100 BSEGX, 2PN, 63” Treater
 (2007) Formpack Resin Bag Unloading System.
 Baldor mod. D50400P, 400hp Motor, 500V, 1750/1900 RPM; (2005) Anton VAP,
 20hp Blower w/ Filter; (2013) Twin City mod. RBN-SW, 10hp Size 909 Transfer Blower.
 Never Used.; Alpine mod. 1-HS65 Control Console; Brampton mod. 450-30-ALE Control
 Console; Cincinnati 5hp Blower; NYB mod. 22PI.5, 15hp, 3525 RPM Blower; NYB
 mod. 22PI.5, 3hp, 3525 RPM Blower; (4) Spencer mod. 1205-SS, 7 1/2hp, 3515 RPM
 Blowers; (4) Spencer mod. 1205-SS, 10hp, 3515 RPM Blowers; W&H mod. 7560, 64”
 Bubble Cage; GEC 94” Bubble Cage Guide; (2) W&H 7560, 64” Primary Nips; Biellon
 64” Secondary Nips; (4) AEC 2400, 1500 & 2022 Poly Cool Units; Bellmark Printer;
 Corona Treater; Enercon Treater; (2001) Five Rivers 20hp Hyd. Pump; GEC Center
 Guide; (1995) Amplas MUPCH 48-72, 72” Dancer w/ Unwind, 3015; (1995) Amplas
 M7401, 94” Post Gusseter w/ Slit Scale; (2000) Amplas MUPCH 48-60, 60” Dancer
 w/ Unwind, 3115; (1998) Battenfeld 130” Gusset Boards; Alpha Marathon 52”
 Bubble Cage; (1999) Erema R2-60780 Roll Feeder; ALSI PAO32E Palin Water
 Treatment; Interlake Pallet Racking; (4) Rex, GE & Eaton KVA Transformers;
 ACME mod. TTDB, 300 KVA Transformer; Rathgeber 125 KVA Transformer; American
 20hp Blower; (2) Galvanized Storage Bins; Harrington ERIA 2-Ton Electric Hoist;
 Premier Sutor Bilt mod. GAEMBLA Rotary Positive Blower; (1995) Ruilli 350mm Dual
 Lip Air Ring; (1995) Ruilli Tower 350mm Dual Lip Air Ring; Kierel 450mm Dual Lip
 Air Ring; (1993) Sano 18” Single Lip Air Ring; Electrical Control Panels &
 Disconnects; Video Jet 130; HP Jet Printer
Hartford City, IN

Major Blow Molding Operation

Public Auction Major Blow Molding Operation

(2010) Nissei ASB 70DHP Biaxial Stretch Blow Molder
(2006) Nissei PF8-4B Biaxial Stretch Blow Molder
(1991) Nissei ASB650 Stretch Blow Molder (Conv. To 650 EX)
(2) (2001) Belliss & Morcom VH9H3N High Pressure Air Compressors
Foremost DI-2, 15hp Scrap Grinder
(1990) Bekum H121D Dbl Die Blow Molder
(1983) Bekum H151D Dbl Die Blow Molder
Toyota 5000lb LPG Forklift
Foremost DI-2 Scrap Grinder
Webb 17”x60” Gap Red Engine Lathe
(1994) Sidel SBO 4/6 Rotary Stretch Blow Molder
(1992) Walton Stout WSP185 Vacuum Loader

STRETCH BLOW MOLDERS
  • (11/2010) Nissei Mod. ASB-70DPH, Biaxial Stretch Orientation Blow Molder, 8-Cavity, 4-Blow, w/ Pro-Face Controls, Mod. 35 Injection Unit S/N 1364, Hopper/Feeder, (1992) Walton Stout Mod. WSD-185-Hi-Heat, Vacuum Loader S/N 5799-A1-2-02, (2) Sterlco Mod. F6016-MX 400 Degree Temp Controllers.  S/N 329A60983
  • (2006) Nissei Mod. PF8-4B, Biaxial Stretch Orientation Blow Molder, 8-Cavity, 4-Blow w/
  • (1992) Walton Stout Mod. WSD-185-Hi-Heat Vacuum Loader S/N 5799 A-1, Mod. 35 Injection Unit, Proface Controls, Hopper/Feeder, Color Matrix Liquid Colortrant Feeder
  • (1994) Sidel Mod. SBO 4/6 Four, Four Station Rotary Stretch Blow Molder, w/ Bottle Feeder, 8-Zone Oven, 1900 DAN, (1994) Anduze Elevator Conveyor, Two-Step, 6-Heating Modules, 10 Ton Closing Force,w/ 6’ Offeed Conveyor (Recent Rebuild).  S/N 244
  • Nissei ASB650 (Converted to Nissei 650EX Specs), 6500 Stretch Blow Molder, New Touch Screen Controller, Walton Stout Dryer, Vacuum Loader
  • (7) (1991) Nissei Mod. 650NHII, 650 Ton Stretch Blow Molders (7 in Storage located one mile away at 341 Bonn E. Circle, Corona, CA)

 BLOW MOLDERS

  • (1996) Bekum Mod. BM304D, Single Extrusion, Dbl. Die Blow Molder, w/ BMC Controls, 3-Nozzle Head, 4-Cylinder Takeaway, Triple Cavity Molds, Stainless Steel Overhead Platform & Doors, Integral Leak Detector, Auto. Takeout, New Efficient A.C. Motors & Drives, (1997) Piovan Mod. C30iX Hopper/Feeder S/N 3AL-6410, Mod. 601, 60 HP Extruder S/N 0524400329, Rittal A/C Unit, Dynacon Mod. UPM Conveyor, Bosch Accumulator, Spengler Electronic Ionisator.  S/N 2003050024
  • (1989) Bekum Mod. BM-303D, Single-Extrusion, Dbl. Die Blow Molder, w/ Mod. PR30T Controls, Stainless Steel Overhead Platform & Doors, Integral Leak Detector, Auto. Takeout, New Efficient A.C. Motors & Drives ,3-Nozzle Head, Dual Cylinder Takeaway, 13 Heating Zones, Mod. 601, 60 HP. Extruder S/N 52440246, 6’ Takeoff Conveyor, (1996) Piovan Mod. C30iX Hopper/Feeder S/N 2AL6086-6367, Rittal A/C Unit, Delta Mod. VFD-B Drive. S/N 100265081
  • (1990) Bekum Mod. H121D, Single Extrusion, Dbl. Die Blow Molder, Stainless Steel Overhead Platform, PLC Controlled, Mod. S-70 Extruder S/N 952441-5-101.3, 2.38 Belt Drive Ratio, 4.58 Total Ratio PVL, Novatec Mod. AF-1 Motor Speed Control, (1997) Piovan Mod. C30iX Hopper/Feeder S/N 3AL-6408, Bunting Magnetics, Magnetic Separator. S/N H-121-D-203-5
  • (1986) Bekum Mod. BM-203D, Single Extrusion, Dbl. Die Blow Molder, Stainless Steel Overhead Platform & Doors, Integral Leak Tester, Auto Takeout, w/ Mod. PR30T Controls, 2-Nozzle Head,  Mod. S601 Extruder S/N 52440177, Rittal A/C Unit, Piovan Hopper/Feeder.  S/N 100265047
  • (1984) Bekum Mod. H111, Single Extrusion, Dbl. Die Blow Molder, Stainless Steel Overhead Platform & Doors, New A.C. Motor & Drives, w/ Mod. PR30T Controls, 2-Nozzle Head, Mod. S631 40 HP Extruder S/N 31879447, (1999) Piovan Mod. C30iX Hopper/Feeder, 15 Zone. S/N 26825507
  • (1986) Bekum Mod. H111D, Single Extrusion, Dbl. Die Blow Molder, Stainless Steel Overhead Platform & Doors, New A.C. Motor & Drives w/ Mod. PR30T Controls, 2-Nozzle Head, EMI 24” Takeoff Conveyor, Mod. S631, 40 HP Extruder S/N 104992588, Piovan Mod. C31X Hopper/Feeder, Whitlock Mod. SRI-02 Vacuum Hopper.  S/N 26825545
  • (1983) Bekum Mod. H151D, Single Extrusion, Dbl. Die Blow Molder, Recent Upgrade w/ New Efficient A.C. Motors & Drives, Stainless Platform & Dies w/ Mod. AVG EZ Series Touchscreen Controls, 2-Nozzle Head, EMI 24” Takeoff Conveyor, 60 HP Extruder, Foremost Hopper/Feeder.  S/N 62975.5.037
  • (1979) Bekum Mod. S82, Single Extrusion, Dbl. Die Blow Molder Recent Upgrade w/ New Efficient A.C. Motors & Drives, Stainless Platform & Dies, w/ AVG EZ Series Touchscreen Controls, 3-Nozzle Head, EMI 24” Takeoff Conveyor, Fasti Farragtech Resin Dryer, A/C Unit, 60 HP Extruder, (1997) Piovan Mod. C30iX Hopper/Feeder S/N 3AL6407.  S/N 278168
  • (11) Extra Blow Mold Heads, (7) Cabinets of Bekum, Nissei and Sidel Spare Parts.

HDPE MOLDS – BEKUM

  • 1 Litre/32oz 38mm 6 Cavity; 1 Litre/32oz 38mm 4 Cavity; 1 Litre/32oz Dosing Cap/Buttress Neck 4 Cavity; 500mL 38mm 4 Cavity; 16oz 38mm 6 Cavity; 15.2oz 38mm 6 Cavity; 32oz 28mm Handleware 4 Cavity; 8oz 28mm Round 4 Cavity; 32oz F Style 28mm 4 Cavity; BirdBall/Disk – 2 Cavity; 1 Gal w/ Handle 2 Cavity; 1 Litre Boston Round 4 Cavity; 1 Litre Round Cavity; 1 Litre Ajax Cavity; 2oz Boston Round 4 Cavity; 4oz Boston Round 2 Cavity; 6oz Boston Round 2 Cavity; 8oz Oval 4 Cavity; 8oz Boston Round 2 Cavity; 8oz Round w/ Square Shoulders 2 Cavity; 8oz Cylinder Round 2 Cavity; 8oz Cylinder Round w/ Square Shoulders 2 Cavity; 8oz Oval 2 Cavity; 9oz Oval 2 Cavity; 12oz Cylinder Round Square Shoulders 4 Cavity; 14oz Baby Oil 4 Cavity; 15oz Cylinder Round 2 Cavity; 15oz Round Square Shoulders 4 Cavity; 16oz Oval 4 Cavity; 16oz Cylinder Round Square Shoulders 2 Cavity; 18oz Bullet Cylinder Round; 24oz Cylinder Round 2 Cavity; 24oz Cylinder Round 4 Cavity; 32oz Cylinder Round Radius Shoulders 4 Cavity; 32oz Cylinder Round Slanted Shoulders 4 Cavity – Label Protect; 32oz Cylinder Round Slanted Shoulders 4 Cavity; 32oz Cylinder w/ Handleware 6 Cavity; 64oz Dishwashing Detergent w/ Handleware 2 Cavity; 64oz Cooking Oil w/ Handleware 2 Cavity; 100mL Square Oval 2 Cavity; 250mL Oval Lotion Bottle 4 Cavity; 300mL Cylinder Round w/ Square Shoulders 6 Cavity; 300mL Cylinder Wound w/ Square Shoulders 2 Cavity; 300mL Fructis Round 6 Cavity; 350mL Bullet 4 Cavity; 500cc Cylinder Round (Spin Trim Neck)

PET MOLDS – NISSEI

  • 42oz 89mm Widemouth 55gr 4 Cavity

PLASTICS EQUIPMENT

  • (3) Foremost Mod. DI-2, 25 HP Scrap Grinders w/ Elevator and Hopper.S/N’s 36480, 37064, N/A
  • (2) Cumberland 25 HP Scrap Grinders.  S/N 4210007817; N/A
  • (2) Foremost Mod. MB2000, 4’X 4’ Hopper/Loader Systems. S/N 37065, 36481
  • (2) Foremost Mod. MB400, Hopper/Loaders.  S/N 23792, N/A
  • (3) Delta Mod. ODK 200, Pressure Tester w/ Conveyor. S/N’s 0170074 (w/ Bekum BM304D)
  • 0170075 (w/ Bekum BM303D), N/A (w/ Bekum BM203D)
  • Adaptive Engineering and Fabrication Vacuum/Hopper Loader System w/ (2) Silos and Conair Franklin Hopper.
  • Adaptive Vacuum/Hopper Loader System w/ Hopper.

FABRICATION EQUIPMENT

  • Lagun Mod. FTV-2, 2 HP Vari. Speed Vertical Mill w/ Acu-Rite DRO’s, Kurt Table Vise. S/N 22042
  • Webb 17” X 60” Gap Bed Engine Lathe, 3-Jaw Chuck.
  • Miller Mod. Millermatic 300, 300 Amp Arc Welder.
  • Miller Mod. Syncrowave 250, 250 Amp Heli-Arc Welder.
  • Mitsui Mod. 205MH, 6” X 18” Manual Surface Grinder.  S/N 80071621
  • Othenberger Mod. 2000, Pipe Threader.
  • Dake Mod. SE712, 7” Horizontal Band Saw.
  • Cuttermaster Tool Grinder, (2) Burr King Dbl. End Grinders, Burr King 1” Vertical Belt Sander, Mac Blast Cabinet, Amrox Mod. DG20, 20 Ton “H” Frame Press, Mod. 4 Arbor Press, Tradesmen 16 ½” Bench Drill Press, 3’ X 4’ Granite Surface Plate, Miscellaneous Shop and Office Equipment.

AIR COMPRESSORS

  • (2) (2001) Belliss & Morcom Mod. VH9H3N, 150 HP, 650 PSI, High Pressure Air Compressors.  S/N N/A; 9375
  • Hankison Mod. HPRD-1.5-700, Air Dryer.  S/N H16958
  • Trane Mod. RTHB130FLF Series R Sentramatic, 150 Ton Chiller System w/ Evapco Cooling Tower.  S/N U98608735
  • Gardner & Denver Mod. ECMQLC, 60 HP Rotary Screw Air Compressor.  S/N M24928
  • Gardner & Denver 40 HP Rotary Screw Air Compressor.
  • (1992) Ingersoll Rand Mod. U15H-SP, 15 HP Rotary Screw Air Compressor. S/N 1CC5T1U92F
  • Gardner & Denver 15 HP Rotary Screw Air Compressor.
  • Hankison Mod. HPRP750, Air Dryer. S/N WH750B460020504
  • Air Receiving Tank.
  • 180 Gal. 750 PSI High Pressure Tank

ROLLING STOCK

  • Toyota Mod. 42-6FGCU25, 5000 Lb. L.P.G. Forklift. S/N 77046

MISC.

  • (3) (2004) Columbian 80000 Lb., 3000 Cu. Ft. Resin Silos.
  • Steffes RO System.
  • (3) Steffes Port. Leak Detectors w/ Bottle Accumulation.
  • Fairbanks 5000 LB. Digital Platform Scale.
  • Color Matrix Mod. CM2000, Color Metering System, ALPS Mod. SC110, Leak Tester w/ 6” X 24” Belt, (4) Sections 20’ High Pallet Racking, 3M Case Sealer, (4) Shop Fans, Incline Belt Conveyor, Spin Trimmer.
Corona, CA

Late CNC Woodworking Cabinet Shop

Public Auction Late CNC Woodworking Cabinet Shop
 
 
  
 
(1999) Schelling mod. CNC Horiz. Panel Saw
 
 
 
 
  
 
(2003) Fravol Rapid RX4 Edge Bander
 
 
 
 
  
 
(2003) Fravol Rapid RX4 Edge Bander
 
 
 
 
  
 
(2003) Busellato mod. Jet 3 CNC Router
 
 
 
 
  
 
Timesaver 43” Dbl. Drum Sander
 
 
 
 
  
 
Cat mod. V40DSA, 4000lb. LPG Forklift
 
 
 
 
  
 
LMC mod. 24-1, 40hp Dust Collector
 
 
 
 
  
 
(1996) International 24’ Bobtail Van Truck
 
 
 
 
  
 
DeVair 15hp Rotary Screw Air Compressor
 
 
 
 
  
 
View of Lumber
 
 
 
 
  
 
(2) Saw Stop Table Saws
 
 
 
 
  
 
(2005) OMGA mod. T421ST Prog. Chop Saw
 
 
 
 
 
       
CNC PANEL SAW
(1999) Schelling mod. FM330/330, 10" Horiz. CNC Panel Saw. S/N 202263
CNC ROUTER
(2003) Busellato mod. Jet 3, CNC Router, Single Spindle, 10-Position, 
A.T.C & (18) Rotary 3-Axis Router Heads, (6) 3-Station Vacuum Holders, 
Vacuum Pump, Pendant Controls, Dbl. Ended Boring Head, Grooving Saw, 
7.5KW, 18,000 RPM. S/N 5604
EDGE BANDER
(2003) Fravol mod. Rapid, RX4, 8' Single-Sided Edge Banding Machine. S/N 221003
PROG. CUT-OFF SAW
(2005) OMGA mod. Y421 ST US, Up-Cut Saw, w/ Prog. Feed. S/N 4857
ROLLING STOCK – SUPPORT – CABINET & EQUIP.
(1996) International mod. 4900, 4x2 254 DT466E, 24' Box Truck. Vin #1HTSDAAN1VH435327, Lic #7K92207
(1998) GMC 1500 Pickup Truck
Caterpillar mod. V4ODSA, 4000lb LPG Forkllift. S/N 2NC101316
LMC mod. 24-1, 40hp Dust Collection System
Timesaver mod. 143, 2HP75, Dbl Drum Wide Belt Sander, 15 & 25hp. S/N 263377
(2) Saw Stop mod. 1CS73239, 10" Cabinet Saws w/ Feeders. S/N 080200610
(2) Castle mod. TSM-21 Pocket Borers
DeVair HDI mod. VAVC-5000, 15hp Rotary Screw Air Compressor w/ 
(2) 300 gal. Tanks, w/ Air Dryer. S/N 35946
DeVair mod. T-4VP-5093, 5hp Vents w/ Arrow Dryer. S/N 49311RE
8'x16'x8' Paint Booth w/ (2) Kremlin Spray Pumps, Exhaust & Lights
(2) JDS Air-Tech mod. 10-16 Air Filters
(2) Festool CleanTee Dust Extractors
Ritter 12'x5' Pneu. Clamping Table
Powermatic mod. 60B, 6" Joiner. S/N 04060600006
(2) (1995) Grass Eco Press mod. P, Hinge Presses. S/N 9505928
Rockwell mod. 14" Vert. Bandsaw
Grizzly mod. G1071 Spindle Sander
Ridgid mod. DP15000 Drill
(1990) Summit mod. T119469, 15" Auto Planer. S/N M514-3124.
(4) Hitachi, Makita & DeWalt C12FDH Miter Saws
Job Carts; Pallet Jack; Material Racks; Clamps
Office Machines & Equipment
Santa Maria, CA

CNC Precision Job Shop

Public Auction CNC Precision Job Shop
2008 Omni-Turn GT-75 NC Lathe
MHP CNC Vertical Mills
Okuma LC-10 4-Axis CNC Lathe
Okuma LC-10 4-Axis CNC Lathe
Haas Indexers
Saima KS-155 Engine Lathe
(2005) Ford F-150 Pick Up Truck
CNC LATHES
(6) (2008) Omni- Turn mod. GT-75 Series II CNC Lathes Micro-Processor Controlled, 5hp
 Spindle, 4" Chuck max, Spindle Nose with 5-C with 4 Deg Cam Lock,(Travel Z-9" X-10"/12")  
Tool HT- 1/2", 300 ipm,  75° Slant Bed Gang Tool, Spindle RPM 4000, Cutting Dia. 6",
W/350 psi Hi Pressure Pump
Condition: excellent
(2) (1997) Omni- Turn mod. GT-75 Series II CNC Lathes Micro-Processor Controlled, 5hp
 Spindle, 4" Chuck max, Spindle Nose with 5-C with 4 Deg Cam Lock,(Travel Z-9" X-10"/12")  
Tool HT- 1/2"/'3/8, 300 ipm,  75° Slant Bed Gang Tool, Spindle RPM 4000, Cutting Dia. 6",
W/350 psi Hi Pressure Pump
Condition: excellent
(7) (1996) Omni- Turn mod. GT-75 Series III/II CNC C-Axis Lathes Micro-Processor Controlled,
 Spindle, 4" Chuck max, Spindle Nose with 5-C with 4 Deg Cam Lock,(Travel Z-9" X-10"/12")  
Tool HT- 1/2"/'3/8, 300 ipm,  75° Slant Bed Gang Tool, Spindle RPM 4000, Cutting Dia. 6",
W/350 psi Hi Pressure Pump
Condition: excellent
(3) (1995) Omni- Turn mod. GT-75 Series III CNC Lathes Micro-Processor Controlled, 5hp
 Spindle, 4" Chuck max, Spindle Nose with 5-C with 4 Deg Cam Lock,(Travel Z-9" X-10"/12")  
Tool Ht 3/8", 300 ipm,  75° Slant Bed Gang Tool, Spindle RPM 4000, Cutting Dia. 6",
W/350 psi Hi Pressure Pump
Condition: excellent
(3) Okuma Mod. LC-10, CNC Lathes, OSP2200L, OSP3000L Controls, 8-Position Turret,
w/Chuck 4500 RPM, S/Ns: 0064, 0083, 0613 w/5-C Capabilities'
(8) Okuma Mod. LC-10-4 Axis Simulturn, CNC Lathes, OSP3000L  OSP5000L Controls,
8-Position Turret,  w/Chuck , 4500 RPM,  w/5-C Collet Capabilities
(6) Chucks,  (3 pcs  6-Jaw),   (3pcs 2 Jaw,  for  Omni Turns-for Okumas
(7) Chucks,  (4pcs  4-Jaw  12" Dia.,  (3pcs 4-Jaw  8" Dia.) - for Okumas
(4) Chucks, (4pcs 6-Jaw  8" Dia.) - for Okumas
(15) Chucks,(3pcs 3-Jaw  8" Dia.), (2pcs 3-Jaw  10" Dia.), (10pcs 3-Jaw  6.5 Dia.) for Okumas
(2) Chucks,(2 - SMW Air Chucks) - for Okumas
(16)  NSK Live Tooling - for Omni Turns
CNC VERTICAL MILLS
(6) MHP Machines mod. S-24, 3 Axis CNC Vertical Mills w/ Hydra Path CNC Controls, Haas
servo Control 4th axis Capable, ATC.
(2) (1987) Nitto Kohki mod. PC-125, Profilators, production Hex cutting auto lathes, 3 Jaw
Chuck, 3" Spindle  with Collets
(5) Haas 4th Axis Indexers (4) with controllers, (1) Direct Interface
(1) Yuasa 4th Axis  indexer Direct Interface
INSPECTION EQUIPMENT
(1)  Scherr Tumico 20" Optical Comparator w/ SH DRO's
(1) Clark Hardness Tester
Inspection pin Sets    .011 - .625
Deltonic Pins .011 - 1.009
Thread Plug Gages  2-56   up to  1.000-12
Thread Ring Gages  4-40   up to  3.000-8 + selected Set Gages for Production Products
Ringmaster Setting Rings, Bore Scope, Dial Test Indicators
Ametek mod. MI-3339,  200lb Tensile Tester
(2) Granite Surface Plates  (1 - 36x48 with stand) (1 - 24x36 with stand)
MISCELLANEOUS INSPECTION TOOLS
Height Gages, Calipers,  O.D. Micrometers, I.D. Micrometers, Internal Dial Caliper
Hole Mics, Pistol Grip Bore Gages, Mag Base w/ Indicator Sets, Granite Base Comparator
Stands, Mitutoyo Rectangular Gage Block Sets, Inspecction V-Blocks, Surftest 301 Surface
Roughness Tester (portable).
ROLLING STOCK
Yale mod ERP030TFN36SE0E2  3000LB Electric Forklift S/N A8070N04250U w/ Charger
(2005) Ford-150 Pick 4 Wheel Drive Truck: Vin # 8881
AIR COMPRESSORS
(2) (2007) Ingersoll Rand mod. UP6-15CTAS-125W, 15hp Tank-Mounted Rotary Screw Air
Compressors, 125PSIG,  6250 RPM,  55CFM  S/N UP6409U07212, UP6408U07212
(1) Pallet Wt. scale, Pennsylvania Model 7500 2000lb capacity.
(16)  Swiftsure Triple Hydraulic 5-C Collet Vises w/Air operated Controller
MISCELLANEOUS SHOP EQUIPMENT
Sunnen Hone with Cabinet mod. MBB-1660 Horizontal Precision, Tree Mod 2UVR 1 1/2HP
Vari. Spd. Vertical Mill w/ Pathfinder 50 DRO,s,  Okuma mod. L.S. 17.5 x 60" engine Lathe
 3-Jaw Chuck Tracing Unit. S/N 4105-9679, Siamp mod KS-135, 15"X48" Engine Lathe.
Vac-U-Max Wet/Dry Vacuum, (12) Lista Cabinets, (7)Lista Work Benches, Darex mod.
 AP5000 Precision Drill Sharpener, Darex mod. E-90 Tool & Cutter Grinder. S/N 90953,
 Leonard Carbide Grinder with Diamond impregnate Wheel, Wesco Die Lift Cart, Accu
Tapper, (4) Burgmaster 6-position Turret Drills, Pedestal Drill Presses, Rockwell Vertical
14" Band Saw, 20" Dbl end Disc Sander, Brilliant Abrasive Chop Saw, Misc Pallet Racks
Racking & Shelving, Rolling Platform Step Ladder 7 Step (8118T92, Balder Dbl End Grinders,
Bench Grinders, Dbl End Polisher, 4-Dr File Cabinets, And Bench Scale, Shop Fans, Drills,
Taps, C-Bores, End Mills, Part Carts,
Wide Selection of Tool Holders, Collets, Soft Jaws, Bar Pullers,   (2) 12/ft. Bar Feeders etc.
Costa Mesa, CA