1993 Tishken Geared Rollformer 30 Stands x 30"- 40" RS x 3" Shaft

1993 Tishken Geared Rollformer 30 Stands x 30"- 40" RS x 3" Shaft

Used

Stock: 7474HP
Model: 32-HW-AS-3 | Serial Number: 21130
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– 30 Pair Of Spindles Mounted On A 32 Spindle Base (Three Bases Coupled Together)
– One Spindle Not Driven Or Geared
– Heavy Wall Machine (0.148" Material Thickness)
– Power Adjusted Spindle Support Stands (Stepping Motor & Ball Screw)
– Shot Pin For Positive Location
– Powered Lateral Traverse With LED Position Readout
– Air Clutch
– Note: Machine was rebuilt in (2003)
– Horsepower: 75
Specs:
Number Of Stands: 30

1983 Tishken Geared Rollformer 28 Stands x 40" RS x 3" Shaft

1983 Tishken Geared Rollformer 28 Stands x 40" RS x 3" Shaft

Used

Stock: 7475HP
Model: 28-HW-3S | Serial Number: 18329
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– One Spindle Not Geared Or Driven
– Powered Feed Roll
– Straightener Unit
– Induction Heater Unit
– Heavy Wall Machine (0.0148")
– Unequaled Gearing
– Air Clutch
– Horsepower: 50
Specs:
Number Of Stands: 28

1986 Tishken Geared Rollformer 28 Stands x 40" RS x 3" Shaft

1986 Tishken Geared Rollformer 28 Stands x 40" RS x 3" Shaft

Used

Stock: 7476HP
Model: 28-HW-3S | Serial Number: 19212- 1186
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– Micrometer Top Spindle Adjustment
– Outboard Supports
– Heat Treated Precision Ground Roll Spindles
– Heavy Wall (0.148")
– Unequaled Gearing
– Induction Heater
– Air Clutch
– Horsepower: 50
Specs:
Number Of Stands: 28

1977 Bradbury Rafted Rollforming Line | 17 Stands x 48" RS x 2 1/2" Shaft

1977 Bradbury Rafted Rollforming Line | 17 Stands x 48" RS x 2 1/2" Shaft

Used

Stock: 7477C
Model: | Serial Number: 7334
Location: Stockton, CA 95201

Equipped With:
– Link Systems Omnilink 805 Press Controller (2012)
– AMS Line Integration XL200CLSI Sinking Controller, Operator Stations, Encoders, Programming, Cutoff Die Accelerator, Etc.(2012)
– Hytrol Powered Conveyor (2012)
– Tooling Carts
– Changeover Table
Specs:
Bradbury First Rafted Rollformer:: S/N 7334 (1977)

1981 Minster OBI Punch Press 60 Ton x 32" x 21"

1981 Minster OBI Punch Press 60 Ton x 32" x 21"

Used

Stock: 7478HP
Model: #6 | Serial Number: 25366
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– Air Clutch & Brake
– Shadow VI Light Curtains
– Wintress Smartpac Automation Control
– Air Counter Balance
– Blow Off
– Auto Lube System
– Dual Palm Controls
– Electric Foot Pedal
– Horsepower: 10
Specs:
Tonnage: 60

2007 Hyd-Mech -Series II Vertical Bandsaw (Tilt Head) | 18" 

2007 Hyd-Mech -Series II Vertical Bandsaw (Tilt Head) | 18" 

Used

Stock: 7480
Model: V- 18 Series II | Serial Number: J0407223
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– Dual Hydraulic Vises
– Hydraulic Power Head Tilt
– Hydraulic Guide Arm
– Hydraulic Blade Tension
– Coolant System
– Horsepower: 7 1/2
Specs:
Throat Depth: 18"

Giddings & Lewis Endomatic Double End, Milling Facing and Centering Machine 8" x 24" – 66"

Giddings & Lewis Endomatic Double End, Milling Facing and Centering Machine 8" x 24" – 66"

Used

Stock: 7483HP
Model: MC | Serial Number: 165-1350
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– 2 Self Centering Hydraulic Clamping Vises
– STI Light Curtains
– Chip Conveyor
– Auto Lube System
– Coolant System
Specs:
Diameter: 8"