INSPECTION: Mon., March 25th, 9AM to 4PM & Morning of the Sale

R/O WATER SYSTEM

• Cal Water Reverse Osmosis (R/O) System for water filtration

PROCESSORS

• (4) Chester Jensen Mod. X70N70 Processors w/ Quad Mixers & Scrapers. S/Ns (2005) 0510-P, (2006) 0613-P, (1998) 9811-P, n/a

PISTON FILLERS

• (2) Hinds Bock Single Piston Fillers; Mod. SP12B / S/N 1058; Mod. SP-64 / S/N 9669
• Accutek 4-Station In-Line Piston Filler w/ 1-1/4” Inch Diameter fill Ports / 6” Dia. x 12” L Piston Bodies / Infeed Hopper / 4.5” W x 10’ L Thru-Put Conveyor w/ Adjustable Rails

COOKER/MIXER

• (1999) APV Jacketed Product Cooker/Mixer w/ Sheer Blade Agitator / Partial Jacket / 70PSI @ 350. S/N K2535

CASE FORMER

• (1982) Wepackit Inc. Mod. 720XCM Case Former. S/N 720XLM

MISC. EQUIPMENT

• (2) Thermo Ramsey Mod. Versaweigh Checkweighers with 3-part weigh tables. S/Ns 08215939; 08215938
• (2) #10 Can Washers with throughput conveyor
• U-MEC Ingredient / Tote Dump Station. / Column Dumper Approximate 6’-7’ Feet Dump Height
• 1,000 Gal. Single Wall Product Storage Tank w/ 3HP Propeller Style Agitator
• Barrett 6000lb. Ride Along Pallet Jack Mod. WRP-60-27 x 48
• Bell Mod. 150 Top & Bottom Semi Automatic Case Taper
• Compacker Erector / Packer / Tape Line
• 3M Top & Bottom Case Taper
• Edlund Can Opening Crushing Line
• Block cheese Cutter
• (2) FPEC Round Plastic Barrel Product / Ingredient / Column Dumpers
• Scott Mixer Multiple Use Product Mill
• Little David S.S. Top & Bottom Case Tape Unit
• NISSAN 3,400lb. Mod. WSRN30 Pallet Jack; S/N #WSRWH41-7W0025
• (2) Contemar 90,000lb Cap. Sack Style Dry Flour Silo
• (2) Tucs Pouch Elevator (Sandwich Style) Conveyor (Approx. 12-15’ Feet Dump Height)
• (2) Misc. Air Fans
• (3) Tucs Mod. TVF-10-25-L Pouch fillers; S/Ns 0054, 0048, 0044
• (4) Bank Seepex Product Worm Style Pumps w/ 1-3/4” In/Out & 1/2HP S.S. Motors.
• Krack Single Fan Coil Transfer Conveyor Frame (approx. 14” W x 18’ L) w/ Adjustable Rails
• Transfer Conveyor (Approx. 15.5” W x 7’ L) w/ Adjustable Rails
• Approx. 350 Gal. S.S. Covered Holding Tank
• (1) Pallet Misc. Pouch Conveyor Sections / Controls / Motors
• (3) Pallets Misc. Controls / Valves / Piping / Belting
• Approx. 300 Gal. Air Receiver Tank
• (3) Fume Gator / Para Vent Vacuum Air Units. (2) Mod. PC1000 / Serial # 60054491
• Pouch/Product Washer / Elevator measures approximately 12” W x 20’ L
• (2) Pallets S.S. Transfer Conveyor Sections
• LOMA IQ Metal Detector, 14” W x 5” T (OAD) Head Measurement. 12” W x 5’ L (4” Inch CLEARANCE). Alarm Start/Stop type reject
• 3M Cast Taper Top & Bottom