Category Archives: IAM

2005 FMT – 3 Stage Belt Type Washer | 84"

2005 FMT – 3 Stage Belt Type Washer | 84"

Used

Stock: 7578
Model: | Serial Number: 040188-AT5
Location: 6400 Jenny Lind Road, Fort Smith, AR 72908

Equipped With:
– 10 Ga. 304 Stainless Steel Construction
– Lift Off Access Covers
– Bolt On Tank Access Panel On Each Tank
– Tanks Are Insulated With 2" Thick Mineral Wool
– 16 Ga. Stainless Steel Skin
– Warrick Level Controller Is Provided For Each Tank
– 1" Stainless Steel Make-Up Line Is Provided For Each Stage
– Tank Floors Are Pitched To 3" Split Nipples
– 3" Bronze Drain Valve On Each Tank
– 2" Emergency Overflow On Each Tank
– Fork Lift Pockets
– 4 Lifting Eyes
– 50 Gallon Satellite Oil Coalescer
– Allen Bradley Control System With Nema 12 Encloser
– 2 Warrick Level Control Units With 3 Probes Per Unit
Specs:
Wash Tank::

2010 Haas – CNC Vertical Machining Center With Pallet Changer | 40" x 20" x 25"

2010 Haas – CNC Vertical Machining Center With Pallet Changer | 40" x 20" x 25"

Used

Stock: 7577
Model: VF-3APC | Serial Number: 1078726
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– Haas CNC Control
– Factory Installed Automatic Pallet Shuttle (2 Pallets)
– Expanded Memory
– Wireless Intuitive Probing System
– Renishaw Probe
– Intuitive Programming System
– Rigid Tapping
– Programmable Coolant
– 34 Position Coolant Spigot
– Aux. Coolant Filter System
– Remote Jog Control With Color LCD
– Coordinate Rotation & Scaling
– M19 Spindle Orientation P & R Codes
– Macros
– Power Failure Module
– Machine Hours:
– Servo Time: 7,893
– Motion TIme: 4,750
– Spindle Time: 4,847
– Horsepower: 20
Specs:
Work Table Size: 48" x 18"

Air Feeds – Coil Reel & Traveling Coil Car | 20,000 Lbs. x 36"  

Air Feeds – Coil Reel & Traveling Coil Car | 20,000 Lbs. x 36"  

Used

Stock: 7592P
Model: R-200 | Serial Number: 800820
Location: 590 Bank St, Painesville, OH 44077

Equipped With:
– Hydraulic Expansion
– Traveling Coil Car
– Back Plate
– Loop Control Arm
– Air Clutch & Brake
– Horsepower: 5
Specs:
Coil Capacity: 20,000 Lbs.

2011 Mitsubishi – CNC Wire-Cut EDM | 27" x 21" x 8.5"

2011 Mitsubishi – CNC Wire-Cut EDM | 27" x 21" x 8.5"

Used

Stock: 7576
Model: BA8 MD+PRO II | Serial Number: 50DB8346
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– Mitsubishi V350 II CNC Control
– 8.4" TFT Liquid Crystal Graphical Display
– Submersible Machining
– Auto Threading
– Paper Filter Filtration
– Dielectric Fluid Chiller Unit
– Remote Hand Pendant Control
– Auto Lube System
– Hours on Machine:
– Machining Time 260 Hours
– Start on 338 Hours
Specs:
Max. Workpiece Dimensions (W x D x H): 27.6" x 21.7" x 8.5"

2000 Sharp – Engine Lathe | 16"/24" x 40"

2000 Sharp – Engine Lathe | 16"/24" x 40"

Used

Stock: 7606
Model: 1640C | Serial Number: 8812118
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– 3 Jaw Chuck
– Steady Rest
– Follow Rest
– Face Plate
– Micrometer Bed Stop
– Tool Post
– Work Light
– Splash Guard
– Horsepower: 7 1/2
Specs:
Swing Over Bed: 16"

1998 Pangborn Shot Peening Machine 48" 

1998 Pangborn Shot Peening Machine 48" 

Used

Stock: 7605P
Model: ES-1863-8 | Serial Number: S980925
Location: 590 Bank St, Painesville, OH 44077

Equipped With:
– Push Button Pendant Control
– Aux. Work Tables On A 36" Work Circle
– Cabinent Work Conveyor
– Pangborn Model 36 Dust Collector, 5 HP Motor, S/N S100101
– Note: Machine Was Used To Shot Peen Counter Shaft Gears & Counter Shaft Assemblies (Eaton Corp.)
Specs:
Diameter Of Work Table (With Partitions): 48"