Category Archives: IAM

1993 Tishken Geared Rollformer 30 Stands x 30"- 40" RS x 3" Shaft

1993 Tishken Geared Rollformer 30 Stands x 30"- 40" RS x 3" Shaft

Used

Stock: 7474HP
Model: 32-HW-AS-3 | Serial Number: 21130
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– 30 Pair Of Spindles Mounted On A 32 Spindle Base (Three Bases Coupled Together)
– One Spindle Not Driven Or Geared
– Heavy Wall Machine (0.148" Material Thickness)
– Power Adjusted Spindle Support Stands (Stepping Motor & Ball Screw)
– Shot Pin For Positive Location
– Powered Lateral Traverse With LED Position Readout
– Air Clutch
– Note: Machine was rebuilt in (2003)
– Horsepower: 75
Specs:
Number Of Stands: 30

National – Model 1250 5 Die Cold Former Bolt Maker | 1 1/4"

National – Model 1250 5 Die Cold Former Bolt Maker | 1 1/4"

Used

Stock: 7473C
Model: 1250 | Serial Number: 39972
Location: 2100 Burlingame, SW, Grand Rapids, MI 49509

Equipped With:
– Hydraulic Clamping of Dies and Punches
– RMG Wire Payoff Unit
– Standard Nut Former Transfer
– Custom Sound Enclosure
– Very low hours. Only apprx. 11,000 parts have been run since the rebuild.
– Also includes assorted spare parts
– Completely rebuilt in 2011
– Currently Located in GM Plant Grand Rapids, MI
Specs:
Wire Diameter: 1 1/4"

1996 Cincinnati – Hydraulic Power Shear | 10 Ga. x 10'

1996 Cincinnati – Hydraulic Power Shear | 10 Ga. x 10'

Used

Stock: 7472
Model: 135HS | Serial Number: 49455
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– Front Operated Digital Programmable Back Gauge
– Square Arm
– Front Material Support
– Pnuematic Rear Sheet Supports
– Power Length Of Stroke Control
– Note: This Machine Is In Excellent Condition With Low Hours, Original Paint & Cincinnati Name Still On Shear Blade
– Horsepower: 15
Specs:
Capacity (Mild Steel): 10 Ga.

1991 Bancroft Miller Dual Head Automatic Stator Core Welder 100 KVA 

1991 Bancroft Miller Dual Head Automatic Stator Core Welder 100 KVA 

Used

Stock: 7469JVCincinnati
Model: | Serial Number: 3204
Location: 10601 Glendale Road, Cincinnati, OH 45215

Equipped With:
– 2 Miller Auto 1 DA Digital Wire Feed Controls
– 2 Miller A1D-2 Wire Feeders
– 2 Tweco Gas Cooled Welding Torches Mounted On A Common Motorized Slide With Programmable Travel
– Programmable Indexing Table Control
– Horsepower: 5
Specs:
KVA Rating: 100

Giddings & Lewis Endomatic Double End, Milling Facing and Centering Machine 8" x 24" – 66"

Giddings & Lewis Endomatic Double End, Milling Facing and Centering Machine 8" x 24" – 66"

Used

Stock: 7483HP
Model: MC | Serial Number: 165-1350
Location: 2301 Belgrave Ave, Huntington Park, CA 90255

Equipped With:
– 2 Self Centering Hydraulic Clamping Vises
– STI Light Curtains
– Chip Conveyor
– Auto Lube System
– Coolant System
Specs:
Diameter: 8"