National Hand Box & Pan Brake

Used

Stock: 5306
Model: U7212 | Serial Number: 454-404
Location:

Equipped With:
Two Large Counter WeightsStop For Repeat BendsPrecision Bearings On The Apron
Specs:
Capacity (Mild Steel): 12 Ga.

2000 Enco Engine Lathe

Used

Stock: 5307
Model: 110- 2079 | Serial Number: 25066
Location:

Equipped With:
Platinim Plus 2 Axis Digital Readout System (USA)3 Jaw Chuck4 Jaw Chuck 5C Collet ChuckSteady RestFace PlateTool Post5C ColletsNote: Single Phase MotorHorsepower: 1 1/2
Specs:
Swing Over Bed: 12"

2000 Siempelkamp Downacting Hydraulic Press

Used

Stock: 5310
Model: Allform | Serial Number: 171- 3
Location:

Equipped With:
Rolling BolsterHigh Pressure Intensifiers For Hydroforming- 36295 PSI (2500 Bar)Hydraulic Units- Rexroth Top Mounted 4- 200 H.P.Motors 4700 Gallon CapacityTie Rod ConstructionCondition: Very Good- Reportedly To Have Only 500 Hours Of Use !!!!!Currently Dismantled And Ready To Load !!!!!Came Out Of Tower Automotive Truck Frames For The Dodge Ram Pick Ups
Specs:
:

IMS Schreiber Water Chiller

Used

Stock: 5299
Model: 50AC/114563 | Serial Number: 23996
Location:

Equipped With:
Discharge & Return Digital ReadoutWater Pump Pressure GaugeCasters
Specs:
Capacity: 1/2 Ton

Embossing Roll

Used

Stock: 4959A
Model: | Serial Number:
Location:

Equipped With:

Specs:
Size: 64" x 20"

1977 Clausing Engine Lathe

Used

Stock: 5300
Model: 1501 | Serial Number: 152162
Location:

Equipped With:
Buck Adjustable 3 Jaw ChuckSteady RestTool PostMicro Meter Bed StopSplash GuardHorsepower: 7 1/2
Specs:
Swing Over Bed: 14.5"

Amada Hydraulic Power Notcher & Coper

Used

Stock: 5334
Model: CSHW- 220 | Serial Number: 22000328
Location:

Equipped With:
Twin Work Guides With Digital ReadoutsCoper Notcher AttachmentTimerElectric Foot PedalHorsepower: 3
Specs:
Tonnage: 20

Sunnen Honing Machine

Used

Stock: 5301
Model: MBB- 1650 | Serial Number: 53822
Location:

Equipped With:
Large Assortment Of ToolingNote: Single Phase MotorHorsepower: 1/2
Specs:
Internal Diameter Range: 0.060"- 6.50"

1998 Hyd-Mech Automatic Vertical Bandsaw (Tilt Head)

Used

Stock: 5335
Model: V14A | Serial Number: H1298011
Location:

Equipped With:
Hydraulic ViseHydraulic TiltingHydraulic Guide ArmHydraulic Blade TensionCoolant SystemWash Down HoseHorsepower: 5
Specs:
Capacity::

Lagun Vertical Mill

Used

Stock: 5302
Model: FTV- 4 | Serial Number: 21602
Location:

Equipped With:
Anilam 3 Axis Digital Readout SystemGeared Table Power FeedGeared Cross Saddle Power FeedGeared Knee Power FeedCoolant SystemOne Shot Lube SystemHorsepower: 4
Specs:
Table Size: 11" x 58"