Author Archives: luis

1995 Komo – CNC Table Router | 96" x 60" x 8"

1995 Komo – CNC Table Router | 96" x 60" x 8"

Used

Stock: 3563
Model: VR805Q | Serial Number: 12446944
Location: 1937 S. Santa Fe Ave., Los Angeles, CA 90021

Equipped With:
– Operators Control Station W/CRT & Numeric Key Pad Start/Stop Buttons With Keys
– 1 Vacuum Pump Sullair Rotary Vacuum Pump MDL: RSVS-12
– Motor Drive 30 HPREF #V1003-9223
– Complete Factory Safety Guards
– Horsepower (Routers) 12
– Horsepower (High Speed Drills) 0.35
– Routing Heads: 12.5 HP
– Drill Heads: 0.35HP
– Vacuum Pump: 30 HP
– Control: Remote Low Voltage Control GE Fanuc OMC CNC Microprocessor
– Emergency Stop Buttons
– Fanuc OMC: Linear & Circular Interpolation
– Cutting Radius CompensationToll Length Offset
– Work Coordinate Offset System
– Absolute & Incremental Programming
– Feed Rate & Rapid Traverse OverrideBackground Editing
– RS232 Port
– Manual Pulse Generator Canned Cycle
Specs:
Three Axis:

ICM – Superhone Auto Indexing Table Blaster | 43"

ICM – Superhone Auto Indexing Table Blaster | 43"

Used

Stock: 4145
Model: | Serial Number: SJ1332
Location: 4763 Murietta Street, Chino, CA 91710

Equipped With:
– ICM Dust Collector
– 6 Gun Total (2 Each Oscillate Up/Down Oscillate Side To Side & 2 Are Fix)
– The Base Table is 43" With 6 Satelite Fixtures (Rotating)
– Speed Controls On Table & Satelite Fixtures
– Speed Controls On Oscillateing Guns As Well
Specs:
Location: Chino, Ca.

1978 Mitchell – Push Pointer | 33,000 lbs

1978 Mitchell – Push Pointer | 33,000 lbs

Used

Stock: 3619JVToledo
Model: | Serial Number: PP-258
Location: 1354 East Broadway, Toledo, OH 43605

Equipped With:
– Push Buttons & Controls
– Vickers Pumps & Valves
– Prints Available
– 8-Sided Grip Jaws
– Current EST Pointing Dies For Taking 1-1/16" Down To 7/8" In (2) Hits

NOTE: Machine Appears To Be Nearly Unused Since 1998 Factory Rebuilt. It Is Missing The PLC And The Hydraulic Pump/Motor & Tank
Specs:
Capacity: 33,000 LBS @ 1989 PSI

1996 Nilson – Automatic Wire Stamping & Forming | 1/8"

1996 Nilson – Automatic Wire Stamping & Forming | 1/8"

Used

Stock: 3630
Model: 752 | Serial Number: 752103
Location: 13855 W. Polo Trail Drive, Lake Forest, IL 60045

Equipped With:
– Air Clutch & Brake
– Shell Type Cams
– Form Stripper(2) 10-Ton Die Heads
– Lube System
– Front & Read Cutoff Rear Auxiliary Slide
– Extra Slides (Split) Cams Etc.Variable Speed Driver
– Roll Type Wire Straightener
– Plus 6000 Series PLC
– Horsepower: 2
Specs:
Maximum Diameter Basic Wire: 1/8"