HYPERMACH 4000 HORIZON CNC PROFILERS

“FULLY ENCLOSED”

• (2) Cincinnati Hypermach 4000, Horiz. CNC Profilers, X-Axis Travel 165″, y-Axis Travel 86″, Z-Axis Travel 31.5″, A-Axis +/- 100 Deg., C-Axis 360 Deg. Spindle Speed 20000 RPM, 6 Meter x 4 Meter Pallet, Auto. Tool Changer 142 Tools, 6 Meter x 4 Meter Pallet, Dimplex Mod. HCV 7,500-PR-NF-L-M Chiller, Henning Chip Conveyor, Flood Coolant System, Oil Skimmer, Pallet Vacuum Pumps, Siemens S/Numerick 840D, 5-Axis CNC Control, RMP Touch Probe, NC4 Laser Probe, Electrics 480V/3/60, Torit Dust Collector, (2) Side, (2) Top & Bottom, (1) Spindle Front Cover, Siemens 840D, 5-Axis Controls, 1000″/Min Rapid, 400 IPM Cutting, Fully Enclosed/Dry Floor, Closed Loop, Full Portal, HSK 100, Tool Holders, (2) Spare Spindles. S/Ns KH00A01090002 (2009 – Installed 2012); KH00A01080006 (2008 – Installed 2010) Mag ‘A’ Hours – on 14,679 Cycle 6,099 Spindle 11,061. Mag ‘B’ Hours – on 11,386 Cycle 5,151 Spindle 8,838
• Mag Cincron 6-Pallet Loading System, Pallet Size, 6M x 4M, Rail System, Cincron Control Pedestal, Safety Lock Out System, Electrics 460V/3/60. S/N XH00A01090001 (2009 Installed 2012)
• Gorbel 2 Ton Jib Crane, 20′ Arm w/ CM Electric Chain Hoist, Pendant Control, Anver 6-Head Vacuum Lifter w/ VLS-08 Vacuum Leakage S/Nsor, 4400 Lb. Cap.

FIVE AXIS VERT. MACHINE CENTER

• (2008) Mazak Variaxis 730-5XII, 5-Axis Trunion Vert. Machining Center, X-Axis Travel 38″, Y-Axis Travel 33″, Z-Travel 22″, A-Axis 120 Deg + 30 Deg, C-Axis 360 Deg. Spindle Speed 10000 RPM, Auto. Tool Changer 80 Tools, Coolant Through The Spindle, Consep 2000 Chip Conveyor, Refrigerated Coolant System, Renishaw Probe, Mazatrol Matrix CNC Control, Laser Tool Setter, Puck System. S/N 208979
• (1998) Okuma & Howa Millac M852V-PF, 5-Axis Vert. Machine Center, 86.6″ x 33.5″ Table, 80.7″ X-Axis, 33.4″ Y-Axis, 29.5″ Z-Axis Travel, 630 IPM Rapid Traverse, 12000 RPM, 30 H.P., Cat #50 Spindle Taper, Kamui Chiller, Coolant System, Fanuc 15-M CNC Control, Electrics 440V/3/60, 3623 Spindle Hours w/ HTST. S/N 208979

HORIZ. MACHINE CENTER

• (2007) Mazak Nexus 6000-II, Horiz. Machine Center, 4-Axis Twin Pallet, 19.6″ x 19.6″ Table Size, 31.5″ X-Axis, 31.5″ Y-Axis, 31.5″ Z-Axis Travels, 2632 IPM Feed Rate, 10000 RPM Spindle Speed, Act #50 Spindle Nose, 50 H.P. Mazatrol Matrix Nexus Controls, 120-Tool Auto. Tool Changer, Consep Chip Conveyor, Coolant System, Chiller, MMK 20″ CNC Indexer. S/N 192831

TURNING CENTERS

• Mori Seiki ZL-45MC, 4-Axis Turning Center, 28″ x 48″ Cap. ,3000 RPM, Head #1 Turret 12 Tools, #2 Turret 10 Tools, 18″ chuck Size, 50 H.P. Motor, Chip Conveyor, Chiller, Fanuc D5F CNC, Prog. Tailstock, Transformer. S/N 23
• (1997) Daewoo Puma 15, CNC Turning Center, Slant Bed, 31.1″ Swing Over Bed, 21″ Swing Over Carriage, 26″ x 62″ Max. Turning Dia., 14.5″ X-Axis, 62″ Z-Axis Travel, Hyd. Chuck, 3000 RPM, 49 H.P. Spindle Motor, A2-11 Spindle Nose, 5.2″ Spindle Bore, 12 Tools, Tailstock, Steady Rest, Turbo Chip Conveyor, Royal Coolant Mist System, Fanuc 16T CNC Control. S/N PM 150235
• Mazak Quick Turn 28N, Turning Center, 20.3″ x 39.7″, 2.75″ Bar Cap., 3000 RPM, Tailstock, Position Tools, Mazatrol T32 CNC Control, (8) Position. S/N 8900
• (2) Okuma LC-20A-2SC, Simulturn 4-Axis CNC Turning Centers, Dual Spindle, 15.75″ Swing Over Bed x 29″, 2.05″ Spindle Bore, 65-3500 RPM, 30 H.P., 6.9″ X-Axis, 30.3″ Z-Axis Travel, 8 Tools. S/Ns 3486 & 3690

VERT. MACHINE CENTERS

• (1998) OKK KCV-600, 3-Axis Vert. Machine Center, 90.5″ x 25.2″ Table Size, 60.3″ X-Axis, 25.2 Y-Axis, 25.2″ Z-Axis, 945 IPM Rapid Traverse, 13000 RPM, 30 H.P., 30-Tool ATC, Daikin Chiller, Neomatic CNC Control, Electrics 440V/3/60, 3912 Spindle Hours w/ HTST. S/N 195
• (1994) Fadal 6030, Vert. Machine Center, 62.5″ x 30″ Table Size, 60″ X-Axis, 30″ Y-Axis, 28″ Z-Axis Travel, 400 IPM Rapid Traverse, 250 IPM Feed Rate, 21-Tool ATC, 10,000 RPM, 22.5 H.P., Cat #40 Spindle Taper, Fadal 88 CNC Control, Electrics 220V/440V/3/60. S/N 9408811
• (1998) Femtec FV-80, 4-Axis Vert. Machine Center, 80″ X-Axis, 32.5″ Y-Axis, 27″ Z-Axis Travel, Haas 12″ Rotary 4th Axis, 4000 RPM, 30-Tool ATC, Coolant System, Fanuc 18-M CNC Control, Electrics 220V/3/60, 3403 Spindle Hrs. S/N 035135
• (1993) Mori Seiki MV-65/50, 4-Axis Vert. Machine Center w/ Indexer, 50.0″ X-Axis, 25.6″ Y-Axis, 25.6″ Z-Axis Travel, 4000 RPM, 30-Tool ATC, Chiller, Coolant System, Fanuc MF-M6 CNC, MMK 20” Indexer. S/N 876
• (2) Mori Seiki MV35/40B&A, 4-Axis Vert. Machine Centers, 43″ x 13″ Table Size, 30″ X-Axis, 13.7″ Y-Axis, 17.7″ Z-Axis Travels, 394 IPM Rapid Traverse, Tecnara Rotary 4th Axis 8″ Indexers, 6000 RPM, 20-Tool ATC’s, Chip Conveyors, Yasnac Mxi CNC Controls. S/Ns 215, n/a
• (1990) Mazak VQC-15, Twin Pallet Vert. Machine Center, 35″ x 16″ Table Size, 22″ X-Axis, 16″ Y-Axis, 15″ Z-Axis Travel, Cat 40 Nose Spindle, 60-6000 RPM, 7.5 H.P. Motor, 16-Tool ATC, Coolant System, Mazatrol M32 CNC Control, Electrics 220V/3/60. S/N 90179

OD GRINDERS

• Warner Swasey 14X40A Step Master 60, CNC Angle Head O.D. Grinder, 14″ x 40″, 20 H.P. Motor, Tailstock, Vickers Acramatic 2100 CNC Control Barnes Oil Filter System. S/N SMA30988
• Landis 3RH, Univ. O.D./I.D. Grinder, 14″ x 72″, Head Swivel Left 0-30 Deg, Head Swivel Right 0-95 Deg, Table Swivel +/- 10 Deg, Down Internal Grinding Attachment, Coolant System w/ Filter. S/N 867-91
• Tschudin HTG-600, 10″ x 24″ O.D/I.D. Grinder. S/N 70364
• Covel 512H, 5″ x 12″ O.D. Grinder. S/N 512H-215

JIG GRINDER

• (1969) Moore No. 3, Jig Grinder. S/N G1447

SURFACE GRINDERS

• (2) Chevalier/Falcon FSG-1224AD, Hyd. Surface Grinders, 12″ x 24″ Table Size. S/N F1849005 & F1865001; Harig Super 618, Surface Grinder. ; (1999) Sharp SG 618-2A, Hyd. Surface Grinder. S/N 88BX144; Boyar Schultz 612, Surface Grinder. S/N 980

HONES

• (2) S/Nnen CV-616, Vert. Cyl. Hones. S/N 2872 & 2862
• S/Nnen MBB1650, Horiz. Stroker Hone, 6.5″ Internal Dia., 16″ Bore Length, 200-2500 RPM, 1/2 H.P. Motor, Hoing Oil Pump, 16 Gal. Tank, Electrics 220V/1/60. S/N 50191

TOOL GRINDERS

• Sterling DG6726, Drill Sharpener. S/N DG6726; Darex XT3000, Optical Tool Grinder. S/N E023088; Makino C-40, Tool & Cutter Grinder. S/N D49-6857; Hartex Tool & Cutter Grinder. S/N 3-151; Leonard Grind-R-Lap; Farrell Sellers Tool Grinder

MACHINE SHOP

• Lagun FTV-2, Var. Spd. Prog. Vert. Mill, 11″ x 58″ Table Size w/ Proto-Trak AGE 2 Prog. Control, Power Feed To Table.
• Lagun FTV-2, Vert. Mill, 11″ x 58″ Table Size, Power Feed To Table, 58-4200 RPM, R8 Spindle Taper, 2 H.P. Motor, Power Draw Bar, 2-Axis D.R.O..
• Hitachi No. 3 Horiz. Mill, 14″ x 63″ table Size, 34″ X-Axis, 14″ Y-Axis, 19″ Z-Axis Travel, Cat #50 Spindle Taper, 25-1500 RPM, 15 H.P. Motor. S/N 87CB171
• (2) Bridgeport 1 1/2 H.P. Vert. Mills, 9″ x 42″ Tables, 60-4200 RPM, S/N 135700 & 135727
• Bridgeport 1 H.P. Vert. Mill, 9″ x 42″ Table, 80-2720 RPM. S/N J-75684
• Hardinge HLV-H, Tool Room Lathe, 3 & 6 Jaw Chucks.
• (1998) Proto-Trak TRL 1745P, 17″ x 45″ Tool Room Lathe, 40-2200 RPM, LX-2 D.R.O.’s. S/N 98-74025
• (3) Okuma LS, 17″ x 60″ Engine Lathes, 10 H.P. S/Ns 4108-10167, 4301-2597, 4102-9024

MISC. EQUIPMENT

• (1965) Blanchard 18D, 42″ Vert. Rotary Surface Grinder, 12″ Height Under Wheel, 18″ x 5″ Wheel Size, 720 RPM Wheel Spd., Sterling Mag. Chuck, 25 H.P., Coolant System. S/N 11351
• DoAll C-305, 12″ x 12″ Horiz. Band Saw, 5 H.P, Roller Infeed Conveyor, 15′ Long x 18″ Wide, Coolant System.
• Mega-Mollart Gun Drill, 1″ x 36″ Bore Cap., Oil Pump & Filter.
• Excello Center Lap.
• Ikeda RM-1175, 4′ x 12″ Col. Radial Arm Drill, 30-1500 RPM, 30″ x 40″ Box Table, 3 H.P. S/N 79376
• (1964) DoAll V36, 36″ Vert. Band Saw, Blade Welder. S/N 3640234
• Sullair ES-8-30H/A, 30 H.P. Rotary Screw Air Compressor, Great Lakes Air Dryer, Oil Water Separator. S/N 003-134913
• (1970) Bryant Center Hole Grinder, 2″-42″ Length Range, 13000-45000 RPM, Angular Grinding Stroke 0.005″ – 0.100″ Planetary Drive Motor 1/4 H.P. S/N C-14170
• Dake 5-150, H-Frame Press, 150 Ton, 16″ Ram Travel, 2 3/4 IPM Ram Spd., 10″ – 30″ Ram To Table, 48″ Width Bet. Uprights, 12 1/4″ Distance Bet. Channels, 2 H.P. S/N 144449
• (1995) Fast-Tap FT1000, Tap Drill. S/N 95060202
• Levin ABJ, Jewelers Lathe. S/N 11423
• Olivetti T6, Drill Press
• Milwaukee Chop Saw
• Delta 20” Disc S/Nder
• Allen Drill & Tap Machine.
• S/Nborn Technologies Ecovac 200/110, Sump Vacuum Pump. S/N MR09-02BSA
• (Lot) Pallet Racking
• Overhead Crane, Free-Standing, 15′ Wide x 20′ Long x 10′ High, Bottom Running Chain Hoist Cap 5000 Lbs.
• (12) Jib Cranes, 15′ Arms, Mounted To Concrete Base, Each w/ 1/2 Ton Elec. Chain Hoist.
• Hunterlift 2039, Scissor Lift, 500 Lb., 20′ Reach. S/N DC8-2

TOOL PRESET & INSPECTION

• Parlec VTB-15, Tool Presetter. S/N 204524
• Parlec Parsetter 1500, Tool Presetter.
• Parlec 3200 ISG, Tool Presetter, Heat Shrink, 85-150 PSI Pressure. S/N 7139
• (1999) Starrett Sigma HB400, Optical Comparator, 16″ Screen Dia., 12″ x 6″ X-Y Range, Motorized X-Y Axis, 2″ Focus Range, 21″ x 5″ Table Size, Computer w/ Software. S/N 4756
• Mitutoyo QM-600, Height Gauge, 0-24″ Range, 0.0001″ Resolution, D.R.O.
• Covel 14B, Optical Comparator, 14″ Screen Dia.
• (16) Lista Cabinets.
• Granite Surface Plate, 60″ x 96″ x 10″.
• Granite Surface Plate, 36″ x 24″ x 4″ Size Mounted On Steel Legs.
• Granite Surface Plate, 36″ x 36″ x 4″ Size Mounted On Steel Legs.